Product Description and Application

• A LED bicycle tail light specially designed for city, trekking and hybrid bikes.
• A Battery light for rear carrier application.

• With 3 red LED's, for a bright light distribution even to the sides over 90 degrees each
• Light is visible in a 220 degrees angle, which brings an optimal safety

Housing

• Rear part made of impact resistant ABS
• Front part made of a "smoky-transparent" PMMA, with an integrated red retro reflector
• Splash and rain water proof

Bolt distance

• 80mm bolt distance for rear carrier mounting, adjustable to 50 mm

Stainless steel fasteners

• 2 x bolts M5 x 12 mm
• 2 x washers
• 2 x lock nuts M5
• 1 x Philips screw 3 x 24 mm

Switch

• Easy operating ON-OFF slide switch on the bottom

Batteries

• 2 x AA-size alkaline batteries are included and assembled

Lighting duration

• Up to 140 hours (depends on battery conditions and outside air temperature)

Retro Reflectors

• A large retro-reflector is integrated in the light housing
• This retro-reflector is approved according ECE-R3 (IA-E1-023349)

Dimensions

• 103 x 53 x 34 mm (Width x Height x Thickness)

Weight

• 110 g (including batteries)

Standards

• Meet the CE standard

Installation & Maintenance:

• For assembly of this light please check the tail light assembly instructions
• Check your bicycle light before every ride
• Don't forget to switch off you tail light after ride
• For your own safety check the brightness of the taillight before every ride and change the batteries on time before the light dims too dark